Make Your Own Clit Pump 2024

Making your own homemade clit pump from items around your house is very easy and you can get some decent ones depending on the items you have.

Clit pumps are not that expensive so a homemade clit pump should only be used if you live in a place that doesn’t allow sex toys or if you one day suddenly decide to give clit pumping a try.

homemade clit pumps

Let’s take a look at a few homemade clit pump options.

The Syringe Style Clit Pump

Using a plastic syringe that’s used for water is your best option for a quick and easy DIY clit pump.

All you need is a medium-large syringe (around 100ml / 4 fl oz) and a tool to cut it open. This can be a kitchen knife or a small saw with small blades so it doesn’t rip it apart.

syringe clit pump

This is how you do it:

  1. Take the syringe and pull the plunger back so you have a wide space to cut without damaging the plunger.
  2. Hold the syringe with one hand in a stable position and use the saw/knife to cut off the end of the syringe so you’re left with a wide-open syringe.
  3. Use a bit of sandpaper or a file and smooth the edge where you cut it. Both for your own comfort and for the clit pump to be able to get a good vacuum seal.
  4. Your brand-new homemade clit pump is now ready to be used.

Use some lube on the edge to make the seal even better and press it gently around your clit and pull the plunger slowly to create a vacuum inside it. Some syringes are very loose and the vacuum is enough to pull it back in, in that case just hole it will your fingers while you use it. A hard-to-pull/push syringe is preferred since it can hold a greater vacuum without the need to hold it.

The Shot Glass Clit Pump

Not the most powerful DIY clit pump but all you need is a single shot glass and some hot water. It’s important that it’s made of glass and has some thickness to it. You can try different glasses if you have multiple styles and sizes of small glasses.

shot glass clit pump

This is how you do it:

  1. Place the glass in a sink
  2. Pour hot water over the glass from a kettle or hot running tap water. It should NOT be boiling but around 50-60 C (122-140 F). The hottest tap water you can get will most likely be perfect for it to work.
  3. Pour the water out of the glass.
  4. Take the glass and quickly press it around your clitoris and hold it with your hand.
  5. There is going to be a vacuum inside the glass since there is a difference between the size of hot and cold air. The air inside will cool down and reduce in size hence the vacuum.

It all depends on your glass size and thickness, water temperature, how quick you are to do it, and the overall temperature of the room you’re in. You can play with some of the variables if you do not succeed, but some are out of your control.

This can also be used as a homemade pussy pump if you use a bigger glass that can cover your entire pussy.

My Final Thought About Homemade Clit Pumps

It’s super easy to make your clitoris pumps if you have the right items in your home, but a brand-new one can be bought for as little as $20. You’ll get a much better experience by getting one of those compared to a homemade one.

I’ve reviewed and tested quite a few clit pumps and found the best clit pumps for a few different use cases. You can always have a look at our guide to clit pumps if you want to learn more about the benefits and risks that you need to know about before getting into clit pumping.

But if you’re a DIY person then go ahead and give it a try and report back what you find. There are a lot of other ways to make your clit pump, but these are just some of my favorite ones.

If you find another way to make a clit pump then comment below and I’ll give it a try myself.

Anyway, hope you learned something useful that will bring you some more fun in the bedroom.

Leave a Reply

Your email address will not be published. Required fields are marked *